Anonymous | Login
Project:
RSS
  
News | My View | View Issues | Roadmap | Summary

View Revisions: Issue #40970 All Revisions ] Back to Issue ]
Summary 0040970: Manage Variants - incorrect filter in the "Characteristic Description"
Revision 2019-05-29 17:07 by Sandrahuguet
Steps To Reproduce 1. "Product Characteristic" window:
   1.1 Define a new characteristic variant =yes
       - Navigate to values tab and create three values
       - Navigate to subset tab and create one subset
          - Navigate to subset value tab and add two of the values defined in characteristic values.

2. Create a new product:
   2.1 Is generic = yes
   2.2 Add in "Characteristics" tab, the previous defined: variant = yes and "Characteristic Subset" = the defined.

3. Confirm that the "Characteristic Configuration" is automatically completed

4. "Manage Variants" -> A new screen is opened with the characteristics filtered correctly.

5. Open the filter "Characteristic Description" and verify that there are characteristics that do not belong to the product. In addition, if you deactivate in the "Characteristic Configuration" a value, it also appears.
Revision 2019-05-29 17:01 by Sandrahuguet
Steps To Reproduce 1. "Product Characteristic" window:
   1.1 Define a new characteristic variant =yes
       - Navigate to values tab and create three values
       - Navigate to subset tab and create one value
          - Navigate to subset value tab and add two of the values defined in characteristic values.

2. Create a new product:
   2.1 Is generic = yes
   2.2 Add in "Characteristics" tab, the previous defined: variant = yes and "Characteristic Subset" = the defined.

3. Confirm that the "Characteristic Configuration" is automatically completed

4. "Manage Variants" -> A new screen is opened with the characteristics filtered correctly.

5. Open the filter "Characteristic Description" and verify that there are characteristics that do not belong to the product. In addition, if you deactivate in the "Characteristic Configuration" a value, it also appears.
Revision 2019-05-29 13:06 by Sandrahuguet
Steps To Reproduce 1. "Product Characteristic" window:
   1.1 Define a new characteristic with, three values, and a subset which contains two of the values defined.

2. Create a new product:
   2.1 Is generic = yes
   2.2 Add in "Characteristics" tab, the previous defined: variant = yes and "Characteristic Subset" = the defined.

3. Confirm that the "Characteristic Configuration" is automatically completed

4. "Manage Variants" -> A new screen is opened with the characteristics filtered correctly.

5. Open the filter "Characteristic Description" and verify that there are characteristics that do not belong to the product. In addition, if you deactivate in the "Characteristic Configuration" a value, it also appears.


Copyright © 2000 - 2009 MantisBT Group
Powered by Mantis Bugtracker